Radial Velocity Curves of Ellipsoidal Red Giant Binaries in the Large Magellanic Cloud

Ellipsoidal red giant binaries are close binary systems where an unseen, relatively close companion distorts the red giant, leading to light variations as the red giant moves around its orbit. These binaries are likely to be the immediate evolutionary precursors of close binary planetary nebula and post-asymptotic giant branch and post-red giant branch stars. Due to the MACHO and OGLE photometric monitoring projects, the light variability nature of these ellipsoidal variables has been well studied. However, due to the lack of radial velocity curves, the nature of their masses, separations, and other orbital details has so far remained largely unknown. In order to improve this situation, we have carried out spectral monitoring observations of a large sample of 80 ellipsoidal variables in the Large Magellanic Cloud and we have derived radial velocity curves. At least 12 radial velocity points with good quality were obtained for most of the ellipsoidal variables. The radial velocity data are provided with this paper. Combining the photometric and radial velocity data, we present some statistical results related to the binary properties of these ellipsoidal variables.Comment: 10 pages, 8 figures, 3 table

Charge Radii of beta-Stable Nuclei

In previous work it was shown that the radius of nucleus R is determined by the alpha-cluster structure and can be estimated on the number of alpha-clusters disregarding to the number of excess neutrons. A hypothesis also was made that the radius R_m of a beta-stable isotope, which is actually measured at electron scattering experiments, is determined by the volume occupied by the matter of the core plus the volume occupied by the peripheral alpha-clusters. In this paper it is shown that the condition R_m = R restricts the number of excess neutrons filling the core to provide the beta-stability. The number of peripheral clusters can vary from 1 to 5 and the value of R for heavy nuclei almost do not change, whereas the number of excess neutrons should change with the number of peripheral clusters to get the value of R_m close to R. It can explain the path of the beta-stability and its width. The radii R_m of the stable isotopes with 12 =< Z =< 83 and the alpha-decay isotopes with 84 =< Z =< 116 that are stable to beta-decay have been calculated.Comment: Latex2e 2.09, 10 pages, 3 figure

A newly discovered stellar type: dusty post-red giant branch stars in the Magellanic Clouds

Context: We present a newly discovered class of low-luminosity, dusty, evolved objects in the Magellanic Clouds. These objects have dust excesses, stellar parameters, and spectral energy distributions similar to those of dusty post-asymptotic giant branch (post-AGB) stars. However, they have lower luminosities and hence lower masses. We suggest that they have evolved off the red giant branch (RGB) instead of the AGB as a result of binary interaction. Aims: In this study we aim to place these objects in an evolutionary context and establish an evolutionary connection between RGB binaries (such as the sequence E variables) and our new sample of objects. Methods: We compared the theoretically predicted birthrates of the progeny of RGB binaries to the observational birthrates of the new sample of objects. Results: We find that there is order-of-magnitude agreement between the observed and predicted birthrates of post-RGB stars. The sources of uncertainty in the birthrates are discussed; the most important sources are probably the observational incompleteness factor and the post-RGB evolution rates. We also note that mergers are relatively common low on the RGB and that stars low on the RGB with mid-IR excesses may recently have undergone a merger. Conclusions: Our sample of dusty post-RGB stars most likely provides the first observational evidence for a newly discovered phase in binary evolution: post-RGB binaries with circumstellar dust.Comment: Accepted for publication in Astronomy and Astrophysics Letter

Performance of the Bowen ratio systems on a 22 deg slope

The Bowen ratio energy balance technique was used to assess the energy fluxes on inclined surfaces during the First ISLSCP Field Experiment (FIFE). Since air flow over sloping surface may differ from that over flat terrain, it is important to examine whether Bowen ratio measurements taken on sloping surfaces are valid. In this study, the suitability of using the Bowen ratio technique on sloping surfaces was tested by examining the assumptions that the technique requires for valid measurements. This was accomplished by studying the variation of Bowen ratio measurements along a selected slope at the FIFE site. In September 1988, four Bowen ratio systems were set up in a line along the 22 degree north-facing slope with northerly air flow (wind went up the slope). In July of 1989, six Bowen ratio systems were similarly installed with southerly air flow (the wind went down slope). Results indicated that, at distances between 10 to 40 meters from the top of the slope, no temperature or vapor pressure gradient parallel to the slope was detected. Uniform Bowen ratio values were obtained on the slope, and thus the sensible or latent heat flux should be similar along the slope. This indicates that the assumptions for valid flux measurements are reasonably met at the slope. The Bowen ratio technique should give the best estimates of the energy fluxes on slopes similar to that in this study

A study of the surface energy balance on slopes in a tallgrass prairie

Four slopes (north, south, east, and west) were selected on the Konza Prairie Research Natural Area to study the effect of topography on surface energy balance and other micrometeorological variables. Energy fluxes, air temperature, and vapor pressure were measured on the sloped throughout the 1988 growing season. Net radiation was the highest on the south-facing slope and lowest on the north-facing slope, and the difference was more than 150 W/sq m (20 to 30 percent) at solar noon. For daily averages, the difference was 25 W/sq m (15 percent) early in the season and increased to 60 W/sq m (30 to 50 percent) in September. The east-facing and west-facing slopes had the same daily average net radiation, but the time of day when maximum net radiation occurred was one hour earlier for the east-facing slope and one hour later for the west-facing slope relative to solar noon. Soil heat fluxes were similar for all the slopes. The absolute values of sensible heat flux (h) was consistently lower on the north-facing slope compared with other slopes. Typical difference in the values of H between the north-facing and the south-facing slopes was 15 to 30 W/sq m. The south-facing slope had the greatest day to day fluctuation in latent heat flux as a result of interaction of net radiation, soil moisture, and green leaf area. The north-facing slope had higher air temperatures during the day and higher vapor pressures both during the day and at night when the wind was from the south

A matrix-based approach to solving the inverse Frobenius–Perron problem using sequences of density functions of stochastically perturbed dynamical systems

The paper introduces a matrix-based approach to estimate the unique one-dimensional discrete-time dynamical system that generated a given sequence of probability density functions whilst subjected to an additive stochastic perturbation with known density

Regulatory feedback on receptor and non-receptor synthesis for robust signaling.

Elaborate regulatory feedback processes are thought to make biological development robust, that is, resistant to changes induced by genetic or environmental perturbations. How this might be done is still not completely understood. Previous numerical simulations on reaction-diffusion models of Dpp gradients in Drosophila wing imaginal disc have showed that feedback (of the Hill function type) on (signaling) receptors and/or non-(signaling) receptors are of limited effectiveness in promoting robustness. Spatial nonuniformity of the feedback processes has also been shown theoretically to lead to serious shape distortion and a principal cause for ineffectiveness. Through mathematical modeling and analysis, the present article shows that spatially uniform nonlocal feedback mechanisms typically modify gradient shape through a shape parameter (that does not change with location). This in turn enables us to uncover new multi-feedback instrument for effective promotion of robust signaling gradients